Zinsser® BIN Shellac-Base Interior and Spot Exterior Primer, Flat White, 1 gal Bucket/Pail, 2/Carton

Looking for a “silver bullet” primer that covers everything™ Choose the primer that contractors have kept in their vans for decades: Zinsser® BIN® Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN® Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details). Paint Sub-Category: Primer; Shellac-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.

Global Product Type	Building/Construction Paints & Primers
Paint Sub-Category	Primer, Shellac-Based
Intended Application Environment	Interior/Exterior
Finish/Sheen	Flat
Color(s)	White
Color Family	White
Volume Capacity	1 gal
Packaging Type	Bucket/Pail
Binder/Vehicle Ingredient(s)	Shellac
Diluent/Solvent Ingredient(s)	Water
Application Method	Roller
Recommended Level of Ventilation	Moderate
Application Temperature Range	0º and 90ºF
Applicable Surface Material	Wood
Maximum Coverage Area	500 sq ft
Cure/Dry-Time Range	1-3 Days (Full Cure)
Age Recommendation	Ages 16 and Up
Product Biodegradability Indicator	N
Product Biodegradability in Days	0
Product Compostability Indicator	N
Pre-Consumer Recycled Content Percent	0%
Post-Consumer Recycled Content Percent	0%
Total Recycled Content Percent	0%
Disclaimer Statement	B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
Footnote 1	Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
Footnote 2	Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils