Zinsser® BIN Shellac-Base Interior and Spot Exterior Primer, Interior, Flat White, 1 gal Bucket/Pail, 4/Carton

Looking for a “silver bullet” primer that covers everything™ Choose the primer that contractors have kept in their vans for decades: Zinsser® BIN® Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN® Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details). Paint Sub-Category: Primer; Specialty; Varnish/Shellac; Water-Based; Intended Application Environment: Interior; Finish/Sheen: Flat; Color(s): White.

Global Product Type	Building/Construction Paints & Primers
Paint Sub-Category	Water-Based
Intended Application Environment	Interior
Finish/Sheen	Flat
Color(s)	White
Color Family	White
Number of Colors	1
Volume Capacity	1 gal
Packaging Type	Bucket/Pail
Binder/Vehicle Ingredient(s)	Shellac
Diluent/Solvent Ingredient(s)	Water
Pigment/Dye/Filler Ingredient(s)	Titanium Dioxide
Application Method	Roller
Application Temperature Range	0° to 90° F
Applicable Surface Material	Wood
Maximum Coverage Area	Up to 500 sq ft
Cure/Dry-Time Range	1 to 3 days (Full Cure)
Age Recommendation	Ages 16 and Up
Product Biodegradability Indicator	N
Product Biodegradability in Days	0
Product Compostability Indicator	N
Pre-Consumer Recycled Content Percent	0%
Post-Consumer Recycled Content Percent	0%
Total Recycled Content Percent	0%
Disclaimer Statement	Apply only when air, material and surface temperatures are between 0° and 90° F (-18° and 32° C), surface temperature is within 15° F of the dew point and the relative humidity is below 70%. Not recommended for whole surface exterior application or for application to floors, decks or surfaces subjected to full-immersion and/or prolonged contact with water.
Footnote 1	Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mil
Footnote 2	Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mil