Zinsser® Mold Killing Primer, Interior/Exterior, Flat White, 1 gal Bucket/Pail, 2/Carton

Zinsser® Mold Killing Primer is a protective, water-based coating that can be applied directly over existing mold, mildew and odor-causing bacteria. Featuring a proven, registered and approved antimicrobial-fungicidal agent, it not only covers over associated stains but also kills all pre-existing fungal organisms. Use it directly on nearly any dry, debris-free, non-porous, interior or exterior surface with minimal pre-cleaning in just about any residential, commercial or industrial environment: homes, offices buildings, retail establishments, schools, hospitals, factories and more. And though this primer is compatible with any topcoat product, it pairs perfectly with Zinsser® PERMA-WHITE® Mold & Mildew-Proof™ paints. To fully cover over and obscure heavy stains, particularly those caused by water leaks, a second primer coat with a tailored, stain-blocking product may be required. In such scenarios, BIN® and Cover Stain® primers are highly recommended. Paint Sub-Category: Primer; Water-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.

Global Product Type	Building/Construction Paints & Primers
Paint Sub-Category	Water-Based
Intended Application Environment	Interior/Exterior
Finish/Sheen	Flat
Color(s)	White
Color Family	White
Number of Colors	1
Volume Capacity	1 gal
Packaging Type	Bucket/Pail
Binder/Vehicle Ingredient(s)	Styrene Acrylic
Diluent/Solvent Ingredient(s)	Water
Pigment/Dye/Filler Ingredient(s)	Calcium Carbonate
Application Method	Roller
Recommended Level of Ventilation	Moderate
Application Temperature Range	50° to 80° F
Applicable Surface Material	Wood
Maximum Coverage Area	400 to 450 sq ft
Cure/Dry-Time Range	7 days (Full Cure)
Age Recommendation	Ages 16 and Up
Product Biodegradability Indicator	N
Product Biodegradability in Days	0
Product Compostability Indicator	N
Compliance Standards	EPA Reg. No. 87469-1-69587
Pre-Consumer Recycled Content Percent	0%
Post-Consumer Recycled Content Percent	0%
Total Recycled Content Percent	0%
Disclaimer Statement	Do not apply when air or surface temperatures are below 50° F (10° C) or when drying conditions are poor. Not recommended for new or unpainted metal and vinyl siding or for floors, decks and other surfaces subjected to full-immersion and/or prolonged contact with water. For optimal protection, apply topcoat product within 72 hours.
Footnote 1	Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil
Footnote 2	Recommended Wet Film Thickness to Achieve DFT: 2.5 to 5 mil